Quickstart Guide | Polycom 300 Series Quickstart Guide | Polycom 300 Series
Conference Calls
Place a conference call:
• During a call press the Conf softkey to open a new line
and put the first party on hold
• Enter the number of the next party
• When the call connects, press Join to add the new party
to the call
Transferring Calls
Transferring a call:
• You can transfer calls in two ways:
• Blind Transfer - Transfer a call to another party without
waiting for the other party to answer
• Consultative Transfer - Transfer a call to another party after
speaking to the other person
To perform a blind transfer:
• During a call, press the Trans soft key. This puts the call
on hold
• Press the Blind soft key to enable blind transfer
• Dial the number to which you want to transfer the call
• If the transfer fails, press the Resume soft key to return to
the original call
To perform an consultative transfer:
• During a call, press the Trans softkey. This puts the call
on hold
• Dial the number to which you want to transfer the call. When
the party answers press Trans to send the original call.
If the transfer fails, press the Resume softkey to return to
the original call
Place call on hold:
• Press the Hold softkey
• To return to the call press the Resume softkey
5 6
To Next Page
Loading...
Need help?
General
