3. press Select
To set a ring tone for a contact:
1. press Directory → 1. Contact Directory...
2. search for the contact (see the updating contact directory section)
3. press the soft key Edit and then scroll to Ring Type
4. enter a number that corresponds to the ring type you want
5. press the soft key Save
or
1. press , then select 1. Features... → 3. Contact Directory...
2. search for the contact (see the To add or edit contact section)
3. press Edit and then scroll to Ring Type:
4. enter a number that corresponds to the ring type you want
5. press Save
Go to Table of Content
10 / 11
To Next Page
Loading...
