TRANSFERRING CALLS
To transfer an ongoing call:
1. during a call, press the Trnsfer. The active call is placed on hold
2. place a call to the party to whom you want to transfer the call, then press Dial
3. hold until your call is answered by the second party, then press the Trnsfer again
4. you can now replace the handset
blind transfer (the transfer is unannounced):
1. during a call, press Trnsfer. The active call is placed on hold
2. press Blind
3. enter the number of the party to whom you want to transfer the call
4. press Dial
5. you can now replace the handset
FORWARDING CALLS
You can redirect ALL incoming calls to another phone number
To enable call forwarding, select the forwarding type you want to enable – type A:
1. from the idle screen, press Forward
2. enter a number to forward calls to
3. press the OK
or - type B (if more than one line is configured):
1. select the line you wish to forward the call to
2. dial 999, followed by the number you wish to forward the call to (e.g.: 9991234 to enable
call forwarding to number 1234)
3. press Dial
A voice message confirms that call forwarding is enabled
To disable call forwarding - type A:
1. from the idle screen, press Forward
2. dial “0”
3. press OK
or - type B (if more than one line is configured):
1. select the key corresponding to the line you wish selezionare to disable call forwarding
2. dial 999 followed by 0 (e.g.: 9990 to disable call forwarding on the selected line)
3. press OK
A voice message confirms that call forwarding is disabled
If multiple lines are configured on your phone, you will select type A if you wish to forward calls
addressed to the main line only; you should select type B if you wish to redirect phone calls
addressed to the second line.
Go to Table of Content
6 / 11
To Next Page
Loading...
