Simple search:
3. type the search string (e.g.: first or last name)
4. press Submit
5. select the contact from the list and press or Dial to call
Advanced search:
3. press AdvFind → use fields First Name / Last Name / Phone to search by
name/Surname/phone number
4. press Submit
5. select the desired contact from the list and press or Dial to call
CUSTOMIZING YOUR PHONE
CONTACT DIRECTORY
To add or edit a contact:
1. press , then select 1. Features... → 3. Contact Directory...
2. to add a contact, press More and then Add.To edit a contact, scroll to the contact, and then
press Edit. Adding or editing information about a contact require the Contact field as the
only field required (the contact's phone number)
3. press Save.
To search for a contact in the local contact directory:
1. press , then select 1. Features... → 3. Contact Directory...
2. press More and then Search, complete the fields and press Search again.
ADJUSTING SPEAKER AND RINGER VOLUME
To change the incoming ring tone:
During a call press, + or –
To change the ringer volume:
When the phone is in the idle state, press + or –
You can also prevent your phone from ringing (see the Using Do Not Disturb (DND) section) or
you can choose a silent ring for your phone (see the Customizing ring tones section).
CUSTOMIZING RING TONES
To change the incoming ring tone:
1. press , and then select 3. Settings... → 1. Basic...→ 4. Ring Type...
2. if the phone has multiple lines, select the line you wish to modify, then scroll to the ring
type you want; to hear the ring type before you select it, press Play
Go to Table of Content
9 / 11
To Next Page
Loading...
