To listen to voice messages:
1. press (if multiple lines are configured on your phone, select the line to retrieve
messages from)
2. follow the voice prompts
The number of messages on your display is updated with up to 30 seconds delay, the tone and the
flashing light are immediate.
VIEWING CALL LISTS
Shortcuts:
• missed calls: down arrow
• received calls: left arrow
• placed calls: right arrow
Select a call from any list and do the following:
• to place a call press Dial
• to change the phone number before dialling, press Edit
• to remove the call from the list, press More → Clear
• to store the contact in your Contact Directory, press More → Save
• to view information about the call (date/time), press More → Info
or:
• press → 1. Features... → 5. Call Lists... → 1. Missed Calls... [2. Received
calls... / 3. Placed calls...]
• use the soft keys listed above
THREE-PARTY CALLS
You can add a third party to a conversation. During a call:
1. select the Confrnc soft key (the call is placed on hold);
2. call the second party (the communication is now with the second participant only)
3. press the Confrnc soft key again. You are currently in a conference call. The message
Active: Conference is displayed on your phone screen.
To add another party, repeat this procedure.
Using the Manage soft key you can add a new party as well as mute, hold, or remove one of the
participants. You can also view information about a selected party.
UNIVERSITY DIRECTORY
1. press Directory
2. select the voice 2. University Directory...
Go to Table of Content
8 / 11
To Next Page
Loading...
