Polycom Conference Phone - Placing Calls

10. Press to return to the idle screen.
Ending Active Calls
To end a call:
Press or the End Call soft key.
Note
You cannot end a call that is on hold until you resume the call. To
end a call on hold, press the Resume soft key, and then end the
call.
Placing Calls
You can place a call off-hook (with a dial tone), or onhook
(without a dial tone).
The phone displays the duration of active calls on the phone
screen. The following figure shows an active call to Jane Smith
at directory number 1951 that has lasted for nine seconds.
To place a call off-hook
1. To obtain a dial tone, press or the New Call soft
key.
2. Enter the phone number of the party you want to call.
3. Press the Send soft key.
4. To place a call on-hook (to dial a phone number):
5. Enter the phone number of the party you want to call,
6. Press the Dial soft key.
Note
Instead of entering a phone number from memory, you can
access call lists, directories, and speed dial lists to display and
dial the number for you.
• To access a call list, press the Menu key, and then select
Features > Call Lists > Missed Calls, Received Calls, or
Placed Calls. Scroll to the call you want to dial, and then
press the Dial soft key.