Polycom CX5000 Integration Guide

• Polycom CX200 desktop phones and CX100 speakerphones (connected via USB to a client PC)
• Polycom CX700 IP Phone (with embedded client connected directly to the Office
Communications Server)
Integration Scenarios
This section describes a variety of basic scenarios for integrating Polycom video systems with Microsoft
Office Communications Server environments. These scenarios illustrate the user experience for the
scenarios.
The following scenarios are considered:
1. Point-to-Point calls:
a. Microsoft Office Communicator dials point-to-point to a Polycom HDX 2.5 endpoint
b. Polycom HDX 2.5 endpoint dials points-to-point to Microsoft Office Communicator
2. Multi-point calls:
a. Using Polycom HDX Internal MCU
b. Using Polycom RMX 2000 4.0 MCU
3. Live Meeting Session using People + Content (H.239)
The following general key points should be noted for these scenarios:
• All SIP devices register directly with Office Communication Server, these include the CX700,
HDX endpoints and the RMX2000
• All legacy Polycom video endpoints (VSX and older) connect through the RMX2000 as a normal
H.323 endpoint.
• The RMX2000 functions as a gateway between SIP and legacy protocols such as H.323, ISDN
and PSTN
©2009 Polycom, Inc. All rights reserved. Polycom and the Polycom logo design are registered trademarks of Polycom, Inc.
All other trademarks are the property of their respective owners. Information is subject to change without notice.
11

Polycom CX5000 Specifications

General

Dimensions (WxDxH)	350 x 350 x 360 mm
Networking features	Fast Ethernet
Maximum frame rate	15 fps
ITU-supported standards	ITU-T P.300
Storage temperature (T-T)	-40 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	15 - 85 %
USB 2.0 ports quantity	2
Ethernet LAN (RJ-45) ports	1

Weight and Dimensions

Weight	3150 g