Camera Setting Description
Brightness Use the slider to adjust image brightness.
Contrast Use the slider to adjust image contrast.
Saturation Use the slider to adjust color saturation.
Sharpness Use the slider to adjust video sharpness.
White Balance Specifies how the camera compensates for
variations in room light sources.
Select Auto or adjust the value manually. If you
adjust manually, select a color temperature value.
The color temperature values, measured in
degrees Kelvin, correspond to the color of the
ambient light in a room.
Gain Use the slider to adjust the signal amplification from
the camera.
Backlight Comp Enables or disables backlight compensation.
PowerLine Frequency (Anti Flicker) Change the number to prevent flicker in the video.
5. Do one of the following:
▪ (Windows) Select Apply to save the changes or Default to restore the default settings.
▪ (Mac) Select Save to save the changes or Reset to restore the default settings.
6. (Only for Windows) Select Camera Control to control the camera:
Settings Description
Zoom Adjust camera zoom in or out.
Exposure Set the exposure number.
Pan Adjust the left or right direction of the camera.
Tilt Adjust the up or down direction of the camera.
7. Select OK.
Pair the Studio USB Device to a Bluetooth Device
Connect the Poly Studio USB device to a Bluetooth device and use it as the speaker and microphone of
the device.
You can pair the Poly Studio USB device with a mobile phone, a computer or laptop, or a tablet.
Note: The Poly Studio USB device doesn’t support mixed types of audio and video input. If you connect
it to a computer over USB and Bluetooth at the same time, make sure that your application uses
both audio and video input from Studio USB device over USB.
Managing the Studio USB Device
12
To Next Page
Loading...
