Procedure
1. Connect the EagleEye Cube USB device to your computer, then select the Poly EagleEye Cube
tile in Polycom Companion.
2. Go to Admin Settings > Certificates.
3. Set the Always Validate Peer Certificates From Server option to On.
Create a Certificate Signing Request
You can create a Certificate Signing Request (CSR) and send it to a CA to get a certificate to authenticate
your USB device. You may need to authenticate your USB device while connecting to your provisioning
server.
Note: To create a Provisioning User Certificate, you must use the Polycom Companion application to
generate the CSR.
Procedure
1. Connect the EagleEye Cube USB device to your computer, then select the Poly EagleEye Cube
tile in Polycom Companion.
2. Go to Admin Settings > Certificates.
3. Select Create.
4. Configure the following settings on the Create Signing Request page:
Field Description
Country Specifies the country where your organization is
located.
Note: For EagleEye Cube USB, input a two-
character country code following ISO
3166-1 alpha-2 rules.
State or Province Specifies the state or province where your
organization is located. Default is blank. Maximum
characters: 128.
City or Locality Specifies the city where your organization is
located. Default is blank. Maximum characters:
128.
Organization Specifies your organization name.
Organizational Unit Specifies the unit of business defined by your
organization. Default is blank. Maximum
characters: 64.
Managing the EagleEye Cube USB Device
34
To Next Page
Loading...
Need help?
General
