User’s Guide for Polycom HDX Desktop Systems
12 Polycom, Inc.
To select a near-site or far-site camera:
>> If you are in a call, press Near or Far on the keypad or
Near or Far on the remote control to select either near-site or
far-site control.
To adjust a camera using the keypad or remote control:
1 Select either a near-site or far-site video source to control. During a
multipoint call being hosted by a system in the call, you can only adjust a
camera at the far site that is currently speaking.
2 Press the arrow buttons on the keypad or remote control to move the
camera up, down, left, or right.
3 Press Zoom on the keypad or Zoom on the remote control to
zoom out or in.
This onscreen icon indicates that you have selected
the near-site camera. The Near button on the
keypad is lit.
This onscreen icon indicates that you have selected
a far-site camera or video source. The Far
button on the keypad is lit.
To Next Page
Loading...
