User’s Guide for Polycom HDX Desktop Systems
Polycom, Inc. 21
To stop sending content, select one of the following options:
— Press the Send Computer button on the keypad.
— Press Content
on the remote control.
Showing Content with People+Content™ IP
People+Content™ IP allows you to send content from a computer that is not
connected directly to the Polycom HDX system.
To install People+Content IP on a computer:
1 On a computer with a Microsoft® Windows XP, Windows Vista, or
Windows 7 operating system, open a web browser and go to
www.polycom.com/ppcip.
2 Download and install the People+Content IP software.
To start showing content:
1 On the computer, start the Polycom People+Content IP application.
2 Enter the IP address or host name of the Polycom HDX system and the
meeting password, if one is set.
3 On the computer, click Connect.
4 Open the content you want to show, and click in People+Content IP.
Points to note about People+Content IP:
• People+Content IP provides video-only content. No audio is shared.
• People+Content IP supports any computer desktop resolution with color set to
16-bit or higher.
• Your computer resolution can be set to anything, but People+Content IP scales
the image to 1024x768 or 1280x720.
• The People+Content IP application must be installed on a computer.
• For a computer connected directly to the Polycom HDX system, Polycom
recommends using the Send Computer button or Content
button instead of People+Content IP.
If you are using multiple screens on your computer, move the People+Content IP
icon to the screen you want to share.
To Next Page
Loading...
Need help?
General
