Polycom IP 6000 - Forwarding Calls

15
FORWARDING CALLS
1. Press the “Forward” soft key OR press the Menu button, and select 1
for Features, and 2 for Forwarding.
2. If “Always Forward” is currently disabled, “Always (Disabled)” will be
displayed.
3. Press 1 for “Always”.
4. Enter / verify the contact number where calls will be forwarded.
5. Press the “Enable” soft key.
Disabling “Always Forward”:
1. If “Always Forward” is currently enabled, “Always (Enabled)” will be
displayed.
2. Press 1 for “Always”.
3. Press the “Disable” soft key.
“Forward On Busy” and “Forward On No Answer” can be set in
a similar manner.