User Guide SoundPoint IP 650
1 - 8
To attach the base as a wall mount:
1. Place all cords in the recessed area above the modular jacks.
2. On the back of the phone, remove the key located behind the hook switch
and reposition it so that the end tab (at a 45
0
angle) is facing up.
3. With mounting tab of the base unit facing up, fasten the base unit to the
wall mount using wall anchors (not included).
Note
The wall mount is not included in SoundPoint IP 650 SIP package. Contact your
system administrator if you require one.
To Next Page
Loading...
