Polycom IP 650 - Answering a Call

User Guide SoundPoint IP 650
3 - 4
To place a call using the headset:
1. Do one of the following steps:
a With the optional headset connected, press or the
NewCall soft key to obtain dial tone.
Press .
Dial the desired number using the dial pad.
b With the optional headset connected, dial the desired number using
the dial pad.
Press .
Answering a Call
When you are not in another call, you can answer a call in three basic ways
using your SoundPoint IP 650 phone:
• using the handset
• using the speakerphone
• using the headset
The steps for answering an incoming call when you are in another call are
different if your phone is configured for:
• A single Line Key per line
Note
To permanently enable your headset, refer to Headset Memory Mode on page 2-6.