Using the Basic Features of Your SoundPoint IP 650 SIP Phone
3 - 3
To place a call using the handset:
1. Do the following steps in any order:
— Pick up the handset.
— Dial the desired number using the dial pad.
To place a call using Hands-Free Speakerphone mode:
1. Do one of the following steps:
a With the handset on-hook, press , , or the
NewCall soft key to obtain dial tone.
Dial the desired number using the dial pad.
b With the handset on-hook, dial the desired number using the dial pad.
Press , , or the Dial soft key.
Note
You can also dial using the SIP URL or IP address. To obtain the IP address of your
phone, press followed by followed by Status > Platform > Phone. The IP address is
listed together with other phone information. For example, 10.3.0.42, sip:
jane@polycom.com.
Press the Name soft key and enter the URL or IP address. Use * for “.” and # for
“@”. Then press the Send soft key to complete the call.
Support for SIP URL or IP address calling may be disabled. Contact your system
administrator.
To Next Page
Loading...
