Using the Basic Features of Your SoundPoint IP 650 SIP Phone
3 - 15
Static Forwarding
To enable call forwarding to another party:
1. Do one of the following steps:
— Press and select Features > Forward...
— Press the Forward soft key from the idle display.
2. (Optional) If multiple lines are configured on your phone, select the line
to forward from the list using and .
3. Using and , select the forwarding type you want to change and
then press the Select soft key. The options are:
— Always—For all incoming calls
—No Answer—Once all options to accept calls have been taken
—Busy—When you are already in a call
4. Depending on your selection:
a If you select Always, enter a number to forward all future incoming
calls to.
To Next Page
Loading...
