Page 7
How to Put a Call on Hold
Call Hold and Resume
During a call, press the Hold button
1. Press Hold button or Resume soft key to resume the call
When a call has been on hold for an extended period of time, both visual and
audible alerts appear. Contact your system administrator to determine if this
feature is enabled/disabled, what the time period is, and wha
are available. When active on a call, at a volume
that is typically lower than the normal ringer volume.
Note As using the Hold feature typically generates music or a beeping tone,
avoid putting a conference call on hold.
Multiple Calls on Hold
If multiple calls are on hold, use the Up and Down Arrow keys to switch
between the calls, then press the Resume soft key to retrieve the desired call.
If two or more calls are on hold, an indication appears on the graphic display,
for example “3/4”, indicating that this is the third call out of four calls.
How to Put a Call on Hold and Multiple Calls on Hold
Dial Line 1
Messages
Menu
NewCall
Mon, Jul 6
641
10:12
A
Callers Dir
1
2 3
4 5 6
7 8 9
*
0
#
ABC DEF
GHI
PQRS TUVW XYZ
OPER
JKL
MNO
-
+
Hold
NewCall
3:18p
To:5195891234
Resume
0.15
Press Hold key to put
call on hold. Press
Resume soft key or
Hold key again to
resume call.
When call is on hold
the receiver points
upward.
6:18p
Hold: Jack White 5196751
Resume
New Call Join
3.27
3
4
To Next Page
Loading...
