Polycom SoundPoint IP 501 Quick Tip

Quick Tip
SoundPoint ® IP, SIP 3.1.0
5
To answer the call on the remote line:
>> Do one of the following:
• To use the handset, lift the handset, and then quickly press (for less than
two seconds) the line key adjacent to the remote line that is ringing.
• To use the speakerphone, do one of the following:
— Quickly press (for less than two seconds) the line key adjacent to the
remote line that is ringing.
— Press the Pickup soft key.
• To use the headset, do one of the following:
— Press the Headset key, and then quickly press (for less than two
seconds) the line key adjacent to the remote ringing line.
— Configure the phone to enable Headset Memory (refer to the
appropriate User Guide). In this case, either pressing the Pickup soft
key or a quick press on the line key adjacent to the remote ringing line
will answer the call using the headset as the audio connection.
The call connects. The caller ID of the party that initiated the call appears
on the screen.
To ignore the call on the remote line:
>> Press the Silence soft key.
Your phone stops ringing, but the remote phone continues to ring.
To obtain more information about the call on the remote line:
>> Press and hold (for more than two seconds) the line key adjacent to the
remote line that is ringing.
To place a call to the remore party:
>> Press the Dial soft key.

Polycom SoundPoint IP 501 Specifications

General

Brand	Polycom
Model	SoundPoint IP 501
Category	IP Phone
Language	English