Polycom SoundPoint IP Phones: Reboot and Reset
Factory resetting a phone to its defaults is time-consuming and not generally
recommended as a troubleshooting step, except as a last resort.
You should not factory reset a phone to address call quality issues.
Objective
To factory reset a Polycom SoundPoint IP phone.
Please Note:
• Factory resetting a phone will restore the device to its factory default state, erasing all personalized
settings, speed dials, line keys, and configuration.
• These procedures specifically concern the Polycom SoundPoint and SoundStation IP series of
phones. See here for the VVX series.
Applies To
• Polycom Soundpoint IP Phones
Procedure
To restart or reboot
For each model listed below, press and hold the indicated keys in combination:
• IP 335: 2, 4, 5, 6
https://support.8x8.com/equipment-devices/phones/polycom/polycom-soundpoint-ip-phones-reboot-factory-reset
Updated: Wed, 17 Aug 2022 00:03:44 GMT
Powered by
1
To Next Page
