1-800-942-4700 broadcore.com
How to Use your IP Phone — page 7
Call Park
Call Park is a “non exclusive Hold” It puts a call on hold that can be
picked up anywhere at the company. (Not a transfer) A call can be
parked by anyone at any extension and then the call picked up from
any extension. Once a call has been parked your phone is free for
other calls. You should have overhead paging to utilize Call Park most
efficiently. Only one call can be parked at any extension. If the parked
call has not been picked up after a set period of time, the call will ring
back to the phone where the call was answered and parked from. This
timer can be set by your group administrator.
Call Park with a PARK Button
đƳ While on the call you want to park
đƳ Press the softkey labeled More twice
đƳ Press the softkey labeled Park
đƳ Dial the extension (of the person the call is for.)
đƳ Press the softkey labeled Enter
đƳ Instant Message or Page the person on overhead paging
to let them know there is call parked at their extension
Park Pickup
To pick up any call parked at any extension
đƳ Press the softkey labeled ParkPck
đƳ Enter the extension
đƳ Press the softkey labeled Enter
To Next Page
Loading...
