TECHNICAL SPECIFICATIONS
© Polycom, Inc. 27 VORTEX EF2201 Reference Manual
Automatic Dialing WHEN PROGRAMMING EMERGENCY NUMBERS AND/OR MAKING TEST
CALLS TO EMERGENCY NUMBERS
1. Remain on the line and briefly explain to the dispatcher the reason for the call.
2. Perform such activities in the off-peak hours, such as early morning or late
evening.
Telco Connector A FCC compliant telephone cord and modular plug is provided with this equipment.
This equipment is designed to be connected to the telephone network or premises wir-
ing using a compatible modular jack that is Part 68 complaint. See the rest of these
installation instructions for details.
Canadian Telco
Requirements
This product meets the applicable Industry Canada technical specifications
Before installing this equipment, users should ensure that it is permissible to be con-
nected to the facilities of the local telecommunications company. The equipment must
also be installed using an acceptable method of connection. The customer should be
aware that compliance with the above conditions may not prevent degradation of ser-
vice in some situations. Repairs to certified equipment should be coordinated by a
representative designated by the supplier. Any repairs or alterations made by the user
to this equipment, or equipment malfunctions, may give the telecommunications
company cause to request the user to disconnect the equipment.
The Ringer Equivalence Number (REN) assigned to each relevant terminal device
provides an indication of the maximum number of terminals allowed to be connected
to a telephone interface. The termination on an interface may consist of any combina-
tion of devices subject only to the requirement that the sum of the Ringer Equivalence
Numbers of all the devices does not exceed 5.''
The REN of this equipment is either marked on the unit or included in the new style
USA (FCC registration number). In the case that the REN is included in the FCC
number the user should use the flowing key to determine the value:
The FCC number is formatted as US: AAAEQ##TXXX.
## is the Ringer Equivalence Number without a decimal point (e.g. REN of 1.0 = 10,
REN of 0.3 = 03). In the case of a “Z” ringer, ZZ shall appear. In the case of approved
equipment without a network interface and equipment not connecting to circuits with
analog ringing supplied then “NA” shall appear.
CE Mark R& TTE
Directive
This EF2201 has been marked with the CE mark. This mark indicates compliance
with EEC Directives 89/336/EEC, 73/23/EEC 1999/5/EC. A full copy of the Decla-
ration of Conformity can be obtained from Polycom Ltd, 270 Bath Road, Slough,
Berkshire, SL1 4DX, UK.
Declaration of Conformity:
Hereby, Polycom Ltd. declares that this EF2201 is in compliance with the essential
requirements and other relevant provisions of Directive
1999/5/EC.
Konformitetserklæring:
Hermed erklærer Polycom Ltd., at indestående EF2201 er i overensstemmelse med de
To Next Page
Loading...
