Polycom Vortex EF2241 User Manual

Installed Voice Business Group
RS-232 Command Set:
Vortex EF2241 Programming Guide
Copyright
© 2003 Polycom, Inc.
Polycom  and the Polycom logo are registered trademarks of Polycom, Inc.
ASPI, Vortex, VS4000, Viewstation, and iPower are
registered trademarks of Polycom, Inc.
All other brand names, product names, and trademarks are the
sole property of their respective owners

Polycom Vortex EF2241 Specifications

General

Brand	Polycom
Model	Vortex EF2241
Category	Telephone Accessories
Language	English

Summary

RS-232 Hardware

Programming Tips

Initialization

Using Acknowledgements

Details how to use acknowledgments for robust host program operation.

Command Structure

Command List

Command Reference

AA -- Enable or Disable Auto Answer Mode

Sets or queries the status of the auto answer feature.

ACKMOD -- Enable or Disable Acknowledgment Mode

Controls whether or not status messages are sent.

AEC -- Enable or Disable Acoustic Echo Cancellation

Sets or queries the status of the Acoustic Echo Cancellation (AEC) algorithm.

AECMODE -- Set Amount of Double Talk Suppression used in the AEC.

Sets the amount of double talk suppression used in the AEC.

AGC -- Enable or Disable Mic/Line Input Automatic Gain Control

Sets or queries the status of the Automatic Gain Control (AGC) algorithm.

AGCMAX -- Set Maximum Allowed Mic/Line Input AGC Gain

Sets the maximum gain the AGC can apply on input channels.

AGCMIN -- Set Minimum Allowed Mic/Line Input AGC Gain

Sets the minimum gain the AGC can apply on input channels.

AGCRATE -- Set Ramp Rate of Mic/Line Input AGC

Sets or queries the maximum rate at which AGC can increase/decrease gain.

AHCP -- Enable or Disable Call Progress Based Auto Hangup

Sets or queries the status of call progress based auto hangup feature.

AHLD -- Enable or Disable Loop Drop Based Auto Hangup

Sets or queries the status of loop drop based auto hangup feature.

AMASGN -- Assign Inputs to an Automixer

Assigns mic/line inputs to internal automixers.

AMAUTO -- Select Automatic or Manual Gating for each Automixer Input

Selects or queries automatic or manual gating thresholds for automixer inputs.

AMBUSID -- Set Automixer Groupings for EF Bus

AMCHAIR -- Enable Chairman Mode for Specified Automixer

Enables, disables, or queries chairman mode for a specified automixer.

AMCHNUM -- Set Chairman Mic for Specified Automixer

Sets the chairman microphone for the specified automixer.

AMDECAY -- Set Decay Time for Automixers

Sets or queries the decay time (in milliseconds) for both automixers.

AMGATEC -- Set Automixer Gating Control Mode

Sets the automixer gating control mode for the specified input channel.

AMGATER -- Set Automixer Gate Ratio

Sets the automixer gate ratio (in dB) for the specified input channel.

AMGATET -- Set Automixer Gate Threshold

Sets the automixer gate threshold (in dB) for the specified input channel.

AMGNOM -- Set Global Maximum Number of Open Mics for Bus Automixer

Sets the global maximum number of open mics (NOM) for the specified bus automixer.

AMHOLD -- Set Automixer Hold Time

Sets or queries the hold time (in milliseconds) for both automixers.

AMLMM -- Set Last Mic On Mode for Specified Automixer

Sets the 'last mic on' mode for the specified automixer.

AMLMN -- Set Microphone That Will Remain On in Manual Last Mic On Mode

Sets the microphone number that will remain on when 'last mic on' mode is manual.

AMNOM -- Set Local Maximum Number of Open Mics for Automixer

Sets the local maximum number of open mics (NOM) for the specified automixer.

AMNOMAT -- Select NOM Attenuation on Each Output

AMOFFAT -- Set Off Attenuation for the Specified Automixer

AMPRIOR -- Set Gating Priority for the Specified Mic

AMREFB -- Set Automixer Reference Bias for the Specified Automixer

AMREFE -- Enable Automixer Reference for Specified Automixer

BAUD -- Set Baud Rate for RS-232 Port

Sets the baud rate for the rear panel RS-232 port.

BUSREF -- Set Which AEC Reference is Placed on EF Bus

COUNTRY -- Specify Country Definitions for Phone Interface

DELAYO -- Set Output Delay

DELAYOE -- Enable Output Delay

DIAL -- Send DTMF Digits to Phone Interface

ERROR -- Enable or Disable Error Messages

FADERGIL -- Set Fader Gain of Line Inputs as a Group

Sets the fader gains of all line inputs simultaneously.

FADERGIM -- Set Gain of Microphone Inputs as a Group

Sets the fader gains of all microphone inputs simultaneously.

FADERI -- Set Input Gain Fader

FLASH -- Execute Hook Flash

FLOW -- Set Flow Control Mode for RS-232 Port

Sets the flow control mode for the rear panel RS-232 port.

FPLOCK -- Lock/Unlock Front Panel

Controls the front panel lock feature to prevent unauthorized changes.

FPPSWD -- Change Front Panel Password

Sets or queries the front panel password for unlocking.

GAINA -- Set Phone Input Gain

GAIND -- Set Gain of Incoming DTMF Tones

GAINDIT -- Set Gain of Incoming DTMF Tones

GAINDT -- Set Dial Tone Gain

GAINGIL -- Set Gain of Line Inputs as a Group

GAINGIM -- Set Gain of Microphone Inputs as a Group

GAINI -- Set Input Gain

Adjusts the gain of the input channels.

GAINO -- Set Output Gain

GAINP -- Set Phone Output Gain

GAINSIT -- Set From Phone User Tone Gain

GAINSOT -- Set To Phone User Tone Gain

GMUTEO -- Mute All Outputs

ID -- Set Device ID

LAGC -- Enable or Disable Line Input Automatic Gain Control

LAGCLINKAB -- Enable or Disable Stereo AGC Linking on Inputs A and B

LAGCLINKCD -- Enable or Disable Stereo AGC Linking on Inputs C and D

LAGCMAX -- Set Maximum Allowed Line Input AGC Gain

Sets the maximum gain AGC can apply on line input channels A-D.

LAGCMIN -- Set Minimum Allowed Line Input AGC Gain

Sets the minimum gain AGC can apply on line input channels A-D.

LAGCRATE -- Set Ramp Rate of Line Input AGC

LEC -- Enable or Disable LEC

Sets or queries the status of the line echo canceller (LEC).

LECMODE -- Set Amount of Double Talk Suppression used in the LEC.

Sets the amount of double talk suppression used in the LEC.

LIA -- Assign Action for when Logic Input is Activated

LID -- Assign Action for when Logic Input is Deactivated

LIH -- Assign Action for when Logic Input is Held

LOA -- Define Behavior for Logic Output Activated State

LOD -- Define Behavior for Logic Output Deactivated Status

MACROA -- Add Command to Current Macro

MACROK -- Delete One or All Macros

MACROQ -- Execute Macro Quietly

MACROW -- Write Macro to Non-Volatile Memory

MACROX -- Execute Macro

MGAIN -- Set Crosspoint Gains in Main Matrix or Submatrix

MGATE -- Select Gated or Ungated Microphone Signal in Matrix

MIC -- Enable Microphone Gain Stage on Inputs 1-4

MMUTE -- Mute Crosspoint in Main Matrix or Submatrix

MUTEGIL -- Set Mute Status of Line Inputs as a Group

MUTEGIM -- Set Mute Status of Microphone Inputs as a Group

MUTEI -- Mute One or More Inputs

MUTEO -- Mute One or More Outputs

NC -- Enable Noise Cancellation

Sets or queries the status of the Noise Cancellation (NC) algorithm.

NCL -- Set Noise Cancellation Attenuation

Sets or queries the attenuation level of the Noise Cancellation algorithm.

NVINIT -- Reinitialize Non-Volatile Memory

NVLOCK -- Lock/Unlock Non-Volatile Memory

Controls the non-volatile memory lock feature.

NVPSWD -- Change Non-Volatile Memory Password

PEQIA -- Set All Parameters for Specified Parametric EQ Input Stage

Sets or queries all parameters for parametric EQ filters on input channels.

PEQIB -- Set Bandwidth Parameter for Specified Parametric EQ Input Stage

Sets or queries the bandwidth parameter for parametric EQ filters on input channels.

PEQIE -- Set Enabled Parameter for Specified Parametric EQ Input Stage

Sets or queries the enabled parameter for parametric EQ filters on input channels.

PEQIF -- Set Frequency Parameter for Specified Parametric EQ Input Stage

Sets or queries the frequency parameter for parametric EQ filters on input channels.

PEQIG -- Set Gain Parameter for Specified Parametric EQ Input Stage

Sets or queries the gain parameter for parametric EQ filters on input channels.

PEQIS -- Set Slope Parameter for Specified Parametric EQ Input Stage

Sets or queries the slope parameter for parametric EQ filters on input channels.

PEQIT -- Set Type Parameter for Specified Parametric EQ Input Stage

Sets or queries the type parameter for parametric EQ filters on input channels.

PEQOA -- Set All Parameters for Specified Parametric EQ Output Stage

Sets or queries all parameters for parametric EQ filters on output channels.

PEQOB -- Set Bandwidth Parameter for Specified Parametric EQ Output Stage

Sets or queries the bandwidth parameter for parametric EQ filters on output channels.

PEQOE -- Set Enabled Parameter for Specified Parametric EQ Output Stage

Sets or queries the enabled parameter for parametric EQ filters on output channels.

PEQOF -- Set Frequency Parameter for Specified Parametric EQ Output Stage

Sets or queries the frequency parameter for parametric EQ filters on output channels.

PEQOG -- Set Gain Parameter for Specified Parametric EQ Output Stage

Sets or queries the gain parameter for parametric EQ filters on output channels.

PEQOS -- Set Slope Parameter for Specified Parametric EQ Output Stage

Sets or queries the slope parameter for parametric EQ filters on output channels.

PEQOT -- Set Type Parameter for Specified Parametric EQ Output Stage

Sets or queries the type parameter for parametric EQ filters on output channels.

PHANTOM -- Enable Phantom Power on Inputs 1-4

PHONE -- Take Phone On-Hook or Off-Hook

PRESETK -- Delete One or All Presets

PRESETP -- Set Which Preset Will Be Activated At Power-Up

PRESETQ -- Execute a Preset Quietly

PRESETW -- Save a Preset

PRESETX -- Execute a Preset

REDIAL -- Redial the Last Dialed Phone Number

REFASGN -- Assign AEC Reference to Input Channel

REFGAIN -- Set Reference Output Gain

SGGAIN -- Set Gain of Signal Generator

SGMUTE -- Mute Signal Generator

SWRESET -- Perform Soft Reset of System

VTXMODI -- Enable VTX Mode on Specified Inputs

VTXMODO -- Enable VTX Mode on Specified Outputs