Polycom Vortex EF2241 User Manual

B01MUTEGIM1
Mute all mic inputs.
B01MUTEI11
B01MUTEI21
B01MUTEI31
B01MUTEI41
B01MUTEGIM2
Toggle mute status of all mic inputs.
B01MUTEI1a
B01MUTEI2b
B01MUTEI3c
B01MUTEI4d ,
where a, b, c, and d reflect the mute status (0 or 1)
of each of the mic inputs. If this command was issued
after the example above, then the status messages
would be:
B01MUTEI10
B01MUTEI20
B01MUTEI30
B01MUTEI40 .
B01MUTEGIM?
Query mute status of all mic inputs.
B01MUTEI1a
B01MUTEI2b
B01MUTEI3c
B01MUTEI4d ,
where a, b, c, and d reflect the mute status (0 or 1)
of each of the mic inputs. If this command was issued
after the example above, then the status messages
would be:
B01MUTEI10
B01MUTEI20
B01MUTEI30
B01MUTEI40 .
8.111. MUTEI -- Mute One or More Inputs
This command sets or queries the mute status of the analog inputs (1-4, A-D, T) .
This command is a channel boolean command. See
Section 6.3 and Section 6.1 for more information on this
type of command.
This command is saved to non-volatile memory only as part of a preset. The state of this command will be
restored after power-up only if a preset is saved and that preset is set to be the power-on preset.
Example Description Status Message
B01MUTEI41
Mute input 4 .
B01MUTEI41
B01MUTEIA0
Unmute input A .
B01MUTEIA0
B01MUTEIT2
Toggle mute status of input
T .
B01MUTEITx , where x is either 0 or 1 depending
on the current mute status of the input.
B01MUTEIC?
Query mute status of input
C .
B01MUTEICx , where x is either 0 or 1 depending
on the current mute status of the input.
B01MUTEI*1
Mute all inputs (1-4, A-D, T)
.
B01MUTEI*111111111

Polycom Vortex EF2241 Specifications

General

Brand	Polycom
Model	Vortex EF2241
Category	Telephone Accessories
Language	English