Polycom Vortex EF2241 - AMAUTO - Select Automatic or Manual Gating for each Automixer Input

This command is saved to non-volatile memory only as part of a preset. The state of this command will be
restored after power-up only if a preset is saved and that preset is set to be the power-on preset.
Example Description Status Message
B01AMASGN31
Assign input 3 to automixer #1.
B01AMASGN31
B01AMASGN3?
Query current automixer
assignment for channel 3 .
B01AMASGN3x , where x is 0, 1, or 2 depending
on the current automixer assignment for channel 3
. If this command is issued after the example
above, then the status message will be
B01AMASGN31 .
B01AMASGN*0
Assign all mic inputs to no
automixer.
B01AMASGN*ääää
B01AMASGN*ààåå
Assign inputs 1-2 to automixer #1
and inputs 3-4 to automixer #2.
B01AMASGN*ààåå
B01AMASGN*?
Query automixer assignment for all
mic/line input channels.
B01AMASGN*abcd , where each of the letters (a,
b, etc.) is either ä, à, or å depending on the
current automixer assignment for each channel. If
this command is issued after the example above,
then the status message will be B01AMASGN*ààåå
.
8.12. AMAUTO -- Select Automatic or Manual Gating for each
Automixer Input
This command selects or queries the state of automatic or manual automixer gating thresholds for the
specified input channel. Automatic thresholds mean that the automixer adaptively determines the gating
thresholds based on current speech and noise levels using the gating ratio specified by the AMGATER
command. Manual thresholds mean that the automixer uses the absolute threshold set via the
AMGATET
command.
This command is a channel boolean command. See
Section 6.3 and Section 6.1 for more information on this
type of command.
This command is saved to non-volatile memory only as part of a preset. The state of this command will be
restored after power-up only if a preset is saved and that preset is set to be the power-on preset.
Example Description Status Message
B01AMAUTO31
Select automatic thresholds for
automixer gating on input channel 3
.
B01AMAUTO31
B01AMAUTO30
Select manual thresholds for
automixer gating on input channel 3
.
B01AMAUTO30
B01AMAUTO32
Toggle between automatic and
manual thresholds for automixer
gating on input channel 3 .
B01AMAUTO3x , where x is 0 or 1 depending on
whether input channel 3 is currently set for manual or
automatic thresholds.