Polycom Vortex EF2241 User Manual

This command has the same format and restrictions as the PEQOA command except that only one
parameter, the filter type, is specified instead of all the parameters. See the
PEQOA command for more
information. To set the slope parameter for an input parametric EQ filter, use the
PEQIT command. To set
all the parameters for an input parametric EQ filter, use the
PEQIA command.
This command is saved to non-volatile memory only as part of a preset. The state of this command will be
restored after power-up only if a preset is saved and that preset is set to be the power-on preset.
Example Description Status Message
B01PEQOT3,2,1
Set the type of the parametric EQ on
output 3 , band 2 to parametric.
B01PEQOT3,2,1
B01PEQOTB,1,?
Query current type setting of
parametric EQ on output B , band 1.
B01PEQOTB,1,t , where t is the current setting
of the type parameter for the parametric EQ on
output B , band 1. If the type parameter of this
filter is set to the same value given in the example
above, then the status message will be
B01PEQOTB,1,1 .
8.132. PHANTOM -- Enable Phantom Power on Inputs 1-4
This command sets or queries the status of phantom power on each of the microphone inputs.
This command is a channel boolean command. See
Section 6.3 and Section 6.1 for more information on this
type of command.
This command is saved to non-volatile memory only as part of a preset. The state of this command will be
restored after power-up only if a preset is saved and that preset is set to be the power-on preset.
Example Description Status Message
B01PHANTOM21
Enable phantom power for input
channel 2 .
B01PHANTOM21
B01PHANTOM20
Disable phantom power for input
channel 2 .
B01PHANTOM20
B01PHANTOM22
Toggle phantom power state for
input channel 2 .
B01PHANTOM2x , where x is 0 or 1 depending on
the current state of phantom power on input
channel 2 .
B01PHANTOM2?
Query state of phantom power
for input channel 2 .
B01PHANTOM2x , where x is 0 or 1 depending on
the current state of phantom power on input
channel 2 .
B01PHANTOM*0
Disable phantom power for input
channels 1-4.
B01PHANTOM*0000
B01PHANTOM*1
Enable phantom power for input
channels 1-4.
B01PHANTOM*1111
B01PHANTOM*2
Toggle phantom power for input
channels 1-4.
B01PHANTOM*abcd where a-d are each 0 or 1
depending on the current state of phantom power
for the corresponding input channel.

Polycom Vortex EF2241 Specifications

General

Brand	Polycom
Model	Vortex EF2241
Category	Telephone Accessories
Language	English