Polycom Vortex EF2241 User Manual

8.157. TONER -- Enable or Disable Ring Tones
This command sets or queries the enabled status of the ring tone feature. If ring tones are enabled, a ring
tone is played whenever there is an incoming ring signal on the connected phone line.
This command is a boolean command. See
Section 6.1 for more information on this type of command.
This command is saved to non-volatile memory only as part of a preset. The state of this command will be
restored after power-up only if a preset is saved and that preset is set to be the power-on preset.
Example Description Status Message
B01TONER1
Enable auto ring tones.
B01TONER1
B01TONER0
Disable ring tones.
B01TONER0
B01TONER2
Toggle enabled status of ring tones.
B01TONERx , where x is 0 or 1 depending on the
current enabled state of ring tones.
B01TONER?
Query enabled state of ring tones.
B01TONERx , where x is 0 or 1 depending on the
current enabled state of ring tones.
8.158. VTXMODI -- Enable VTX Mode on Specified Inputs
Vortex devices can be connected to a Polycom VTX 1000 in order to use the wideband capabilities of that
device. When connecting to a VTX 1000, special proccessing is done on the Vortex in order to guarantee
compatibility with the VTX 1000. This command enables processing for the VTX 1000 on the specified line
input or inputs. Note that VTX 1000 mode can only be enabled on the line inputs (A-D) .
This command is a channel boolean command. See
Section 6.3 and Section 6.1 for more information on this
type of command.
This command is saved to non-volatile memory only as part of a preset. The state of this command will be
restored after power-up only if a preset is saved and that preset is set to be the power-on preset.
Example Description Status Message
B01VTXMODIA1
Enable VTX mode on input A.
B01VTXMODIA1
B01VTXMODIB0
Disable VTX mode on input B.
B01VTXMODIB0
B01VTXMODIB2
Toggle status VTX mode on input
B.
B01VTXMODIBx , where x is either 0 or 1
depending on the current status of VTX mode on
input B.
B01VTXMODIA?
Query status of VTX mode on
input A.
B01VTXMODIAx , where x is either 0 or 1
depending on the current status of VTX mode on
input A.
B01VTXMODI*1
Enable VTX mode on inputs A-D .
B01VTXMODI*1111
B01VTXMODI*0
Disable VTX mode on inputs A-D
.
B01VTXMODI*0000

Polycom Vortex EF2241 Specifications

General

Brand	Polycom
Model	Vortex EF2241
Category	Telephone Accessories
Language	English