PRESETW
Global Save a Preset
PRESETX
- Execute a Preset
REDIAL
- Redial the Last Dialed Phone Number
REFASGN
Preset Assign AEC Reference to Input Channel
REFGAIN
Preset Set Reference Output Gain
RING
Preset Enable or Disable Ring Messages
SGGAIN
Preset Set Gain of Signal Generator
SGMUTE
Preset Mute Signal Generator
SGTYPE
Preset Set Type of Signal Produced by Signal Generator
SOUNDL
- Play Sound Locally
SOUNDP
- Play Sound to Phone
SSDELAY
Preset Set Delay Between Screen Saver Screens
SSEN
Preset Enable or Disable Screen Saver
SSSTART
Preset Set Idle Time Required for Screen Saver to Start
SSTEXT
Preset Set Text to be Displayed by Screen Saver
SWRESET
- Perform Soft Reset of System
SWVER
- Query Software Version
TONEE
Preset Enable or Disable Entry and Exit Tones
TONER
Preset Enable or Disable Ring Tones
VTXMODI
Preset Enable VTX Mode on Specified Inputs
VTXMODO
Preset Enable VTX Mode on Specified Inputs
8. Command Reference
8.1. AA -- Enable or Disable Auto Answer Mode
This command sets or queries the status of the auto answer feature.
This command is a boolean command. See
Section 6.1 for more information on this type of command.
This command is saved to non-volatile memory only as part of a preset. The state of this command will be
restored after power-up only if a preset is saved and that preset is set to be the power-on preset.
Example Description Status Message
B01AA1
Enable auto answer mode.
B01AA1
B01AA0
Disable auto answer mode.
B01AA0
B01AA2
Toggle auto answer mode.
B01AAx , where x is 0 or 1 depending on the current state of auto
answer mode.
To Next Page
Loading...
Need help?
General
