Polycom Vortex EF2241 User Manual

This command is saved to non-volatile memory only as part of a preset. The state of this command will be
restored after power-up only if a preset is saved and that preset is set to be the power-on preset.
Example Description Status Message
B01GAINIT10
Set gain on
input T to 10
dB.
B01GAINIT10
B01GAINIT?
Query the
gain on
input T .
F01GAINI2xB01GAINITxS01GAINIAxQ01GAINIAxT01GAINITx,
where x is a number between 0 and 30, depending on the current
setting of the gain on input channel T .
B01GAINI*6
Set gain on
all inputs (1-
4, A-D, T) to
6 dB.
B01GAINI*èèèèèèèèè
B01GAINI*ääääììììä
Set gain on
input
channels 1-4
and T to 0
dB and gain
on input
channels A-
D to 9 dB.
B01GAINI*ääääììììä
B01GAINI*?
Query gain
on all inputs
(1-4, A-D, T)
.
B01GAINI*abcdefghi, where a-i are each between ä and ÿ,
depending on the current setting of the gains for each of the nine
input channels.
8.61. GAINO -- Set Output Gain
This command sets or queries the gain (in dB) of the ten output channels (1-4, A-D, T, L) .
This command is a channel integer command. See
Section 6.3 and Section 6.2 for more information on this
type of command. The minimum and maximum values for this command are -100 and 20, respectively.
This command is saved to non-volatile memory only as part of a preset. The state of this command will be
restored after power-up only if a preset is saved and that preset is set to be the power-on preset.
Example Description Status Message
B01GAINO210
Set gain on output
channel 2 to 10 dB.
B01GAINO210
B01GAINO2?
Query the gain on output
channel 2 .
B01GAINO2x, , where x is a number between -100
and 20, depending on the current setting of the gain
on output channel 2 .
B01GAINO*6
Set the gain on all output
channels (1-4, A-D, T, L)
to 6 dB.
B01GAINO*èèèèèèèèèè

Polycom Vortex EF2241 Specifications

General

Brand	Polycom
Model	Vortex EF2241
Category	Telephone Accessories
Language	English