8.114. NCL -- Set Noise Cancellation Attenuation
8.115.
NVINIT -- Reinitialize Non-Volatile Memory
8.116.
NVLOCK -- Lock/Unlock Non-Volatile Memory
8.117.
NVPSWD -- Change Non-Volatile Memory Password
8.118.
PEQIA -- Set All Parameters for Specified Parametric EQ Input Stage
8.119.
PEQIB -- Set Bandwidth Parameter for Specified Parametric EQ Input Stage
8.120.
PEQIE -- Set Enabled Parameter for Specified Parametric EQ Input Stage
8.121.
PEQIF -- Set Frequency Parameter for Specified Parametric EQ Input Stage
8.122.
PEQIG -- Set Gain Parameter for Specified Parametric EQ Input Stage
8.123.
PEQIS -- Set Slope Parameter for Specified Parametric EQ Input Stage
8.124.
PEQIT -- Set Type Parameter for Specified Parametric EQ Input Stage
8.125.
PEQOA -- Set All Parameters for Specified Parametric EQ Output Stage
8.126.
PEQOB -- Set Bandwidth Parameter for Specified Parametric EQ Output Stage
8.127.
PEQOE -- Set Enabled Parameter for Specified Parametric EQ Output Stage
8.128.
PEQOF -- Set Frequency Parameter for Specified Parametric EQ Output Stage
8.129.
PEQOG -- Set Gain Parameter for Specified Parametric EQ Output Stage
8.130.
PEQOS -- Set Slope Parameter for Specified Parametric EQ Output Stage
8.131.
PEQOT -- Set Type Parameter for Specified Parametric EQ Output Stage
8.132.
PHANTOM -- Enable Phantom Power on Inputs 1-4
8.133.
PHONE -- Take Phone On-Hook or Off-Hook
8.134.
PING -- See Which Devices Are Present
8.135.
PRESETK -- Delete One or All Presets
8.136.
PRESETL -- List All Commmands in a Preset
8.137.
PRESETP -- Set Which Preset Will Be Activated At Power-Up
8.138.
PRESETQ -- Execute a Preset Quietly
8.139.
PRESETW -- Save a Preset
8.140.
PRESETX -- Execute a Preset
8.141.
REDIAL -- Redial the Last Dialed Phone Number
8.142.
REFASGN -- Assign AEC Reference to Input Channel
8.143.
REFGAIN -- Set Reference Output Gain
8.144.
RING -- Enable or Disable Ring Messages
8.145.
SGGAIN -- Set Gain of Signal Generator
8.146.
SGMUTE -- Mute Signal Generator
8.147.
SGTYPE -- Set Type of Signal Produced by Signal Generator
8.148.
SOUNDL -- Play Sound Locally
8.149.
SOUNDP -- Play Sound to Phone
8.150.
SSDELAY -- Set Delay Between Screen Saver Screens
8.151.
SSEN -- Enable or Disable Screen Saver
8.152.
SSSTART -- Set Idle Time Required for Screen Saver to Start
8.153.
SSTEXT -- Set Text to be Displayed by Screen Saver
8.154.
SWRESET -- Perform Soft Reset of System
8.155.
SWVER -- Query Software Version
8.156.
TONEE -- Enable or Disable Entry and Exit Tones
8.157.
TONER -- Enable or Disable Ring Tones
8.158.
VTXMODI -- Enable VTX Mode on Specified Inputs
8.159.
VTXMODO -- Enable VTX Mode on Specified Inputs
1. Introduction