8.66. GATEEN -- Enable Automatic Gating Messages
8.67.
GMUTEO -- Mute All Outputs
8.68.
ID -- Set Device ID
8.69.
LABEL -- Set or Query one of the Device Labels
8.70.
LAGC -- Enable or Disable Line Input Automatic Gain Control
8.71.
LAGCLINKAB -- Enable or Disable Stereo AGC Linking on Inputs A and B
8.72.
LAGCLINKCD -- Enable or Disable Stereo AGC Linking on Inputs C and D
8.73.
LAGCMAX -- Set Maximum Allowed Line Input AGC Gain
8.74.
LAGCMIN -- Set Minimum Allowed Line Input AGC Gain
8.75.
LAGCRATE -- Set Ramp Rate of Line Input AGC
8.76.
LEC -- Enable or Disable LEC
8.77.
LECMODE -- Set Amount of Double Talk Suppression used in the LEC.
8.78.
LI -- Query State of Logic Inputs
8.79.
LIA -- Assign Action for when Logic Input is Activated
8.80.
LID -- Assign Action for when Logic Input is Deactivated
8.81.
LIH -- Assign Action for when Logic Input is Held
8.82.
LIEN -- Enable Automatic Logic Input Status Messages
8.83.
LIG -- Configure Logic Input Pins Into a Group
8.84.
LIK -- Delete One or All Logic Input Pin Commands
8.85.
LIM -- Mask Logic Input Pins
8.86.
LIN -- Assign Command to Logic Input Group
8.87.
LIP -- Set Polarity for Logic Inputs
8.88.
LO -- Query or Set Status of Logic Output Pins
8.89.
LOA -- Define Behavior for Logic Output Activated State
8.90.
LOD -- Define Behavior for Logic Output Deactivated Status
8.91.
LOEN -- Enable Automatic Logic Output Status Messages
8.92.
LOK -- Delete One or All Logic Output Pin Commands
8.93.
LOM -- Mask Logic Output Pins
8.94.
LOP -- Set Polarity for Logic Outputs
8.95.
MACROA -- Add Command to Current Macro
8.96.
MACROK -- Delete One or All Macros
8.97.
MACROL -- List All Commmands in a Macro
8.98.
MACROQ -- Execute Macro Quietly
8.99.
MACROS -- Start a New Macro
8.100.
MACROW -- Write Macro to Non-Volatile Memory
8.101.
MACROX -- Execute Macro
8.102.
METER -- Select which Signal is Displayed on the Front Panel LED Meter
8.103.
MGAIN -- Set Crosspoint Gains in Main Matrix or Submatrix
8.104.
MGATE -- Select Gated or Ungated Microphone Signal in Matrix
8.105.
MIC -- Enable Microphone Gain Stage on Inputs 1-4
8.106.
MINI -- Enable Modem Initialization String
8.107.
MINISTR -- Set Modem Initialization String
8.108.
MMUTE -- Mute Crosspoint in Main Matrix or Submatrix
8.109.
MUTEGIL -- Set Mute Status of Line Inputs as a Group
8.110.
MUTEGIM -- Set Mute Status of Microphone Inputs as a Group
8.111.
MUTEI -- Mute One or More Inputs
8.112.
MUTEO -- Mute One or More Outputs
8.113.
NC -- Enable Noise Cancellation