Polycom Vortex EF2241 - LAGCMAX - Set Maximum Allowed Line Input AGC Gain

disabled. Acknowledgements will be sent for any changes to channel D. From then on, any changes for these
commands for either channel C or D will be set for both channels, and acknowledgements will be sent for
both channels.
This command is a boolean command. See
Section 6.1 for more information on this type of command.
This command is saved to non-volatile memory only as part of a preset. The state of this command will be
restored after power-up only if a preset is saved and that preset is set to be the power-on preset.
Example Description Status Message
B01LAGCLINKCD1
Enable stereo AGC linking on
inputs C and D.
B01LAGCLINKCD1
B01LAGCLINKCD0
Disable stereo AGC linking on
inputs C and D.
B01LAGCLINKCD0
B01LAGCLINKCD2
Toggle stereo AGC linking on
inputs C and D.
B01LAGCLINKCDx , where x is 0 or 1 depending
on the current state of stereo AGC linking on inputs
C and D.
B01LAGCLINKCD?
Query status of stereo AGC linking
on inputs C and D.
B01LAGCLINKCDx , where x is 0 or 1 depending
on the current state of stereo AGC linking on inputs
C and D.
8.73. LAGCMAX -- Set Maximum Allowed Line Input AGC Gain
This command sets the maximum gain that the AGC can apply on input channels A-D . For example, if
LAGCMAX is set to 10, then the AGC for that channel can apply a maximum of 10 dB of gain to the input
signal.
This command was introduced in firmware version 2.5.0.
This command is a channel integer command. See
Section 6.3 and Section 6.2 for more information on this
type of command. The minimum and maximum values for this command are 0 and 15, respectively.
This command is saved to non-volatile memory only as part of a preset. The state of this command will be
restored after power-up only if a preset is saved and that preset is set to be the power-on preset.
Example Description Status Message
B01LAGCMAXA3
Set AGC maximum gain on input
channel A to 3 dB.
B01LAGCMAXA3
B01LAGCMAXB?
Query the AGC maximum gain on
input channel B.
B01LAGCMAXBx , where x is a number between 0
and 15, depending on the current setting of the
AGC maximum gain on input channel B.
B01LAGCMAX*6
Set AGC maximum gain on input
channels A-D to 6 dB.
B01LAGCMAX*èèèè
B01LAGCMAX*ääìì
Set AGC maximum gain on input
channels A-B to 0 dB and AGC
maximum gain on input channels
C-D to 9 dB.
B01LAGCMAX*ääìì