INTEGRATING THE UNIT INTO YOUR SYSTEM
VORTEX EF2211/EF2210 Reference Manual 22 Technical Support: 800.932.2774
1. Assign Inputs Assign each audio source to an input. Remember to include the conferencing equip-
ment such as a video codec and any program audio.
2. Assign Outputs Try to assign as many outputs as you can to one Vortex device to make a simpler sub-
matrix. The bussing gets more complicated if you choose to spread your outputs over
several units.
3. Configure the
submatrix.
To link multiple devices together, use the submatrix on the EF Bus to configure
which signals to receive from other devices that have put their signals on the Bus.
To Next Page
Loading...
