Polycom VVX410 - Page 3

FLIPCO
ECT
Better . Connected
TM
Polycom VVX410 Endpoint
User Guide
Page 3 of 4 Flip Connect Hosted VoIP – Polycom VVX410 Quick User Guide www.ipconnect.co.uk/support/userguides
Phone Basics
Changing
ring tones
Setting the
ring volume
With the handset in its cradle, press the volume bar ( ) up to increase, down to
decrease, this will automaticly save.
Setting the
speaker volume
Press the speaker button ( ) then press the volume bar ( ) up to increase,
down to decrease, this will automaticly save.
Setting the
earpiece volume
Lift the handset then press the volume bar ( ) up to increase, down to decrease,
this will automaticly save.
Call Control
Group pickup
To answer a phone that is part of your group, lift the handset and press more > GrPickup
Place a call on
hold
To place a caller on hold press the hold button ( ).
To go back to caller press resume key
Transferring
Calls
While on a call press xfer button ( ) > dial number > once 2nd
call is answered press xfer button ( )again. If other caller does not answer press cancel
to go back to original caller
-
+
-
+
-
+
To enable DND press the DND button and phone will display red phone icon in top right
hand corner ( ). To disable simply press DND again.
DND
Press home button ( ) > settings > basic > ring type > default >
pick ring tone and press select.
Missed Calls
To check list of missed calls press the down arrow. This will then display all
missed calls to phone including DDI calls and hunt group calls.
To return to the ‘Home’ screen, press the home button ( ) twice.