EasyManuals Logo

Polygroup RX600-NF User Manual

Polygroup RX600-NF
9 pages
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
KEY DESCRIPTION
RX1000 RX1500RX600
PART #
1
2
3
4
5
6
8
9
10
11
12
13
14
15
16
18
19
20
21
22
24
*
Suction Fitting Base
Suction Fitting Screen
Flow Diverter
Plug
Hose
Hose Clamp
Vent Screw
Vent Screw O-Ring
Seal Top
Base
Canister Gasket
Filter Pump Canister
Nozzle
Motor Assembly
Motor Assembly(UK)
Type D Filter Cartridge
Type A/C Filter Cartridge
Rotor Assembly
Volute Cover
Volute Cover Lock Nut (X-600 & X-1000)
Volute Cover Bolt and Nut Set (X-1500 only)
Filter Pump Port / Fitting O-Ring
102” Hose
For RX Series Filter Pump sold separately
P58PF2820P01
P58PF7780W05
P58PF7790W05
P58PF0620K01
P58150036W01
P58219221W05
P58182201W05
P58182501K01
P58PP1853W05
P58183901W05
P58164800K01
P58PP1840W05
P58185201K01
P58X1500GS00
P58X1500BS00
P583041080PR
P58050506001
P58184501K01
P5800400080A
P58037000K01
P584150004W1
7. To replace the Rotor Assembly 18 , remove the Volute Cover 19 and pull out the Rotor Assembly 18 from the Stator 17 . Insert new Rotor Assembly 18 into
the Stator 18 .
8. Align the Shaft properly and fasten the Volute cover 19 with the Volute Cover Lock Nut 20 or with the Volute Cover Bolt and Nut Set 21 .
9. Attach the Nozzle 14 to the outlet of Motor Assembly.
10. Slowly insert the motor assembly 15 back into the Canister 13 , so that the Nozzle 14 is aligned with the outlet port of the Canister 13 .
11. Tighten the Base 11 by turning clockwise, be sure the Gasket 12 is properly in place. To lock the Base 11 , apply the latch pin by turning to the right.
REPLACEMENT PARTS ORDERING INFORMATION
RX1500
21
19
18
17
RX600/1000
20
19
18
17
16 17
OWNER’S MANUAL
Winterizing Your Pump and Long-term Storage
After usage, you can easily empty and store away your pump in a safe place. Some pump owners, however, choose to leave their pump up all year round. In cold areas,
where freezing temperatures occur, there can be a risk of ice damage to your pump. We therefore recommend you drain, disassemble, and properly store the pump,
when the temperature drops below 32 degrees Fahrenheit (0 degrees Celsius).
Clean the Pump Water Thoroughly
1. Let the pump cool down for at least 30 minutes before storage. Clean the pump water thoroughly.
2. Use only damp cloth soaked in mild soap / detergent and water to clean the outer surfaces of the pump. Do not use any kind of chemical or solvent. Always unplug
the pump and stow the cord during cleaning.
3. Keep out of reach of direct sunlight and chemical substances.
4. Save the original packing box for storage purposes.
5. Remove the pipes (if applicable) and store in a safe place. Be sure all accessories parts are clean and completely dry before storage.
6. Bring pump and assessories. indoors and store in a safe and dry area, preferably between 32 degrees Fahrenheit (0 degrees Celsius) and 104 degrees Fahrenheit
(40 degrees Celsius).
PUMP STORAGE & WINTERIZING
P58PF2820P01
P58PF7800W05
P58PF7790W05
P58PF0620K01
P58125036W01
P58220221W05
P58182201W05
P58182501K01
P58PF1007W05
P58100740W05
P58147800K01
P5810030AW05
P58182601K01
P58X600CGS00
P58X600CBS00
P583041037PR
P58050137001
P58PF1009K01
P58PF1010K01
P58030001K01
P584125002W1
P58PF2820P01
P58PF7780W05
P58PF7790W05
P58PF0620K01
P58150036W01
P58219221W05
P58182201W05
P58182501K01
P58PF1007W05
P58PF1013W05
P58147800K01
P58PF1006W05
P58182601K01
P58X1000GS00
P58X1000BS00
P583041080PR
P58050505001
P58PF1009E09
P58PF1010K01
P58037000K01
P584150004W1

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Polygroup RX600-NF and is the answer not in the manual?

Polygroup RX600-NF Specifications

General IconGeneral
BrandPolygroup
ModelRX600-NF
CategorySwimming Pool Pump
LanguageEnglish

Related product manuals