Polypipe SmartStat - Temperature Display

13
The SmartStat can be congured for dierent sensor options such as built in air
sensor, oor sensor or both. The display will clearly indicate which sensor is being used
by showing either “Room Temp” or “Floor Temp” before the actual temperature value.
When the SmartStat is set to use both the air & the oor sensor, the room temperature
will be displayed by default.
To view the current oor temperature, press and hold the Left and Right
arrow keys for 5 seconds, the oor temperature will then be displayed ....................
Temperature Display
Room Temperature Floor Temperature
Smart Series