Polypipe SmartStat - Comfort Levels Explained

15
Comfort Levels Explained
The SmartStat oers three program mode options; Weekday/Weekend
programming, 7 Day programming and 24 Hour programming. There is also the option to
use the thermostat as a Non-Programmable thermostat.
When thermostats are connected to the mesh network, the program mode for
the system is congured by using the Polypipe SmartApp.
The thermostat is supplied with comfort levels already programmed, but these can be
changed easily. The default times and temperature settings are;
07:00 - 21°C (Wake) 09:00 - 16°C (Leave) 16:00 - 21°C (Return) 22:00 - 16°C (Sleep)
If you only want to use 2 levels, you should program the unused levels to
--:--
For Weekday/Weekend programming, the four comfort levels are the same for Mon-Fri, but can
be dierent for Sat-Sun. For 7 Day programming each day of the week can have four dierent
comfort levels. In 24 Hour mode all days are programmed with the same comfort levels.
• To program the comfort levels, use the Left / Right keys to scroll to EDIT .............
• Press Tick to conrm selection ......................................................................................................
• Use the Left / Right keys to select day / period of week (the selection will ash).
• Press Tick to conrm selection ......................................................................................................
• WAKE will now ash and the current time and temperature setting will be shown.
• Press Tick to alter WAKE settings ...................................................................................................
Smart Series