- 38 -
You can then start up your machine. (Follow the below points on the given order
each time you start up the pool heat pump, especially at the beginning of a
season):
• Open by-pass valves
• Start the pool system pump
• Turn on the pool heat pump with the on/off switch (turn it to « I »).
Pool heat pump will work after a delay of around 2 minutes.
• Set regulation (Chapter «Regulation»).
• Set heating (Chapter «Heating»).
After few minutes (time for circuit to heat itself) you can regulate water flow as
explained hereafter (Chapter “Water flow regulation”)
To Next Page
Loading...
