PORA PR-DTC-3000 - Page 17

15
PORA ELECTRIC MACHINERY CO.,LTD.
PR-DTC-3000 Type
4) LANGUAGE
-Turn the dial button in setup menu to move to ‘LANGUAGE'
-To move to ‘LANGUAGE’, press the dial button
(※ The values which can be changed will turn violet.)
- ‘Korean’ or ‘English’ can be set by turning the DIAL.
5) Input/Output checking
6) Factory initialization
- Turn the dial button in setup menu to move to ‘Input/output checking'
-To move to ‘Input/output checking’, press the dial button
- Adjust ‘Control Output’, Voltage Output’ and ‘Current Output’ using the DIAL
to see if there is any problem in the actual output.
(※ The values which can be changed will turn violet.)
- Turn the dial button in setup menu to move to ‘Factory initialization'
-To move to ‘ERASE ALL’, press the dial button
- Select ‘YES’ in ‘Execute Initialization’ using the DIAL to initialize all set data.
SET UP V 2.X
1.
SELECT DATA
2.
DATA SET
3.
USER SET
4.언어/
LANGUAGE
5.
IN/OUT CHECK
6.
DEFAULT RESET
7.
EXIT
DATA 0
ENG
SET UP V 2.X
1.
SELECT DATA
2.
DATA SET
3.
USER SET
4.언어/
LANGUAGE
5.
IN/OUT CHECK
6.
DEFAULT RESET
7.
EXIT
DATA 0
ENG
SET UP V 2.X
1.
SELECT DATA
2.
DATA SET
3.
USER SET
4.언어/
LANGUAGE
5.
IN/OUT CHECK
6.
DEFAULT RESET
7.
EXIT
DATA 0
ENG
IN/OUT CHECK
1.
CONTROL OUT
2.
V OUT (0~10V)
3.
I OUT (4~20㎃)
4.<--
0.0
%
0.0
%
%
0.0
IN : OUT RST EMS BWD PLS
DEFAULT RESET
1.
ERASE ALL
2.<--
YES
All data will be
initialized
! ! ! ! ! ! !