Posey KeepSafe Essential - Page 21

www.posey.com 1.800.447.6739
KeepSafe Essential
21
Bed Mounting
There are two brackets suitable for bed
mounting, the 8276 Wire Bracket and
the 8269 Alarm Attachment Bracket
(with BioThane
®
strap).
The 8276 Wire Bracket fits headboards
and footboards that are ½" – 2"
(1 cm - 5 cm) thick (Fig. 9).
TO MOUNT THE 8276 WIRE BRACKET:
1. Slide alarm onto bracket from top down
until it is firmly in place (Fig. 10).
2. Choose location on headboard where
patient/resident cannot reach or tamper
with the alarm or connections.
3. Pull bracket wire away from alarm to
create an opening wide enough to fit
the headboard or footboard.
Slide bracket onto bed and push down
to ensure a snug fit. Make sure alarm
indicator lights are in clear view of staff.
4. To remove alarm, gently push release
lever IN while sliding alarm up and out
(Fig. 11).
5. Make sure magnet, and/or AC adapter
cable can be secured out of the way
and do not present a tripping hazard.
Fig. 10
PRESS
Fig. 11
PULL LEVER
SLIDE OUT
Fig. 9 - Wire Bracket
MOUNTING