Posey KeepSafe Essential - Page 7

www.posey.com 1.800.447.6739
KeepSafe Essential
7
Features of the KeepSafe Essential (Cont.)
•
Five alarm tones. There are five different alarm tone options
which can be used in different patient/resident rooms, or to discern
between different caregivers or levels of fall risk for easy patient/
resident identification.
•
Three alarm modes. Three alarm modes allow for facility or alarm
choices regarding caregiver notification in the event the alarm is
triggered. The alarm modes are “Voice and Tone,” “Tone Only” and
“Voice Only.”
•
High and low volume settings. Two alarm volume settings allow
for facility or alarm choices regarding caregiver notification in the
event the alarm is triggered. The volume options are low and high.
•
SUSPEND button. Silences the alarm until the magnet is replaced
on the magnet plate. Alarm will resume monitoring when you place
the magnet back on the face plate.
•
Cord and magnet monitoring. Alarm activates when magnet is
removed. Magnet pull cord adjusts to range of mobility and “safety
zone” best suited for each patient/resident.
•
Battery operated. The alarm uses four (4) “AAA” alkaline batteries.
•
Audible low battery warning. Alarm “chirps” about every 15
seconds when batteries need changing. This sound is different than
any of the alarm tones and easily alerts caregivers of the need to
change batteries.
•
DC jack. For AC connection.
•
AC adapter. The KeepSafe Essential 8373AC enables users to
operate on AC electrical power. (To obtain the AC adapter with the
8373 alarm, order the 8373AC).
•
Impact resistant cover. Helps minimize damage if dropped.
NOTE: Cat. 8373NP (No Power Model) does NOT have an ON/OFF
switch. This is to prevent patients/residents or caregivers from turning off
the alarm. The only way to turn off this model is to remove the batteries.
FEATURES