Page 10
NOTE:
While connected, power is supplied through the included USB-C cable. The batteries
are not used and the body will not automatically power down.
Sync.net Now
When selected, the Gage immediately synchronizes stored measurement data to
PosiSoft.net (USB connection required to a computer running PosiSoft Desktop).
Alternatively, select Auto Sync.net from within the USB connect menu to automatically
synchronize upon connection to a PC. Additional measurements added to memory
while connected are synchronized only when the USB cable is disconnected and
reconnected, or when the Sync.net Now option is selected.
NOTE:
PosiSoft Desktop is required when using USB connections to synchronize
measurements with PosiSoft.net.
USB Drive
When USB Drive is enabled, the PosiTector is recognized as a USB mass storage
device which provides a simple interface to retrieve stored data in a manner similar to
USB flash drives and digital cameras. USB Drive is also required to import stored
measurements into PosiSoft Desktop. Once connected, any computer can view
measurements stored in memory by navigating a virtual drive labeled PosiTector using
the supplied USB-C cable.
NOTE:
While connected, power is supplied through the included USB-C cable. The batteries
are not used and the body will not automatically power down.
JSON Files
When enabled (default), JSON schema files will be available in PosiSoft USB drive.
Files can be parsed in to databases and custom software applications.
NOTE:
Disabling this option may reduce the time required for the computer to recognize the
PosiTector when first connected via USB.
To Next Page
Loading...
Need help?
General