Page 11
HTML Report
When enabled (default), a formatted HTML report is viewed by selecting the index.html
or START_HERE.html file found in the root directory. Optionally, text (.txt) files located
in each batch folder provide access to measurement values. Stored readings and
graphs can be viewed or copied using universal web browsers or file explorers.
NOTE:
Disabling this option may reduce the time required for the computer to recognize the
PosiTector when first connected via USB.
Stream
Stream individual readings to a USB connected computer via a serial protocol. Ideal for
use with serial compatible SPC data collection software.
For more information on USB Keyboard and Streaming visit:
www.defelsko.com/usb/stream
Auto Sync .net
When enabled, measurements will automatically synchronize with PosiSoft.net when
connected to a computer running PosiSoft Desktop. Additional measurements added to
memory while connected are synchronized only when the USB cable is disconnected
and reconnected, or when the Sync.net Now option is selected.
NOTE:
PosiSoft Desktop is required when using USB connections to synchronize
measurements with PosiSoft.net.
USB Keyboard
USB Keyboard mode enables PosiTector Advanced instruments to emulate a USB
keyboard when connected to a computer.
USB Keyboard mode communicates with your computer by emulating keyboard
keystrokes. When connected in this mode, PosiTector Advanced instruments will be
recognized as a simple USB keyboard. Each reading is typed, followed by a carriage
return (enter). This provides a simple way to capture readings as they are taken without
any special software, drivers or complex setup.
For more information on USB Keyboard mode visit: www.defelsko.com/connect
To Next Page
Loading...