Page 16
Enabled
When Enabled, allows communication with a computer or smart device running the
PosiTector App via auto-pairing Bluetooth Smart (BLE) wireless technology.
Sync Batches
Select batches to flag them for synchronization to the PosiTector App. Sync Batches is
useful when connecting a new device to a gage with pre-existing batches, since only
batches created while Bluetooth Smart is enabled are automatically selected.
Selected batches are synchronized when the next reading is taken in a batch flagged
for synchronization, or when the Sync Batches option is selected at the bottom of the list
of selected batches.
NOTE:
If Bluetooth Smart is disabled, data from batches selected in the Sync Batches menu
are held in a queue until communication with the PosiTector App is re-established.
Updates
Determines if a software update is available for your Gage.
To perform an update the Gage must be connected to an internet connected computer
running PosiSoft Desktop, or a WiFi network.
See www.defelsko.com/update
WARNING:
The Gage will perform a Hard Reset after an update. All stored measurements will be
erased from memory.
To Next Page
Loading...
Need help?
General