Page 15
Bluetooth Smart
When Enabled, allows communication with a computer or smart device running the
PosiTector App via auto-pairing Bluetooth Smart (BLE) wireless technology.
Send Batches
Transfers selected batches to the PosiTector App. Send Batches is useful when
switching between devices, as only readings and batches that have yet to be
synchronized with any smart device are synchronized automatically.
The Send Batches option is visible in the menu when the Gage is connected to a smart
device running the PosiTector App.
BLE Keyboard
BLE Keyboard mode communicates wirelessly with your computer by emulating
keyboard keystrokes. When connected in this mode, PosiTector Advanced instruments
will be recognized as a simple BLE keyboard. Each reading is typed, followed by a
carriage return (enter). This provides a simple way to capture readings as they are
taken without any special software, drivers or complex setup.
For more information on BLE Keyboard mode visit: www.defelsko.com/connect
Smart Probes
Displays available PosiTector DPM-L and PosiTector CMM-IS Smart Probes within
range of the PosiTector gage. Smart Probes must be powered ON to be visible.
Shortcut:
Check the Shortcut box to add the Smart Probes menu option to the gage’s main menu.
Power Off Time
By default, the PosiTector Advanced powers off after 5 minutes of inactivity. This power
off time interval can be adjusted when connected wirelessly via Bluetooth Smart to help
maintain connectivity while measuring. The interval is user selectable in 5-minute
increments up to a maximum of 60 minutes. Use the (-) and (+) buttons to adjust the
interval time, then select Ok.
To Next Page
Loading...
Need help?
General