Page 3
Memory
The PosiTector SST Advanced has internal memory storage for recording measurement
data. Stored measurements can be reviewed on-screen or accessed via computers,
tablets and smart phones. Measurements are date and time-stamped. Store up to
250,000 readings in up to 1,000 batches.
The memory icon appears when the Gage is set to store measurement data.
Open
Select a previously created batch or sub-batch to open and make it the active batch. If it
contains measurements, on-screen statistics will immediately reflect values calculated
from this batch. The calibration setting (i.e. Cal 1) associated with this batch is also
opened.
View
Use the Up or Down buttons to scroll through information, statistical summary, and a list
of each reading in the currently opened batch. Press the center navigation button to
exit.
Display
Choose between display options in the upper portion of the screen while taking
measurements.
Shortcut:
Press the Up button to scroll through the display options.
NOTE:
The Display option appears only if a batch is currently open.
Annotate
Create meaningful batch names and enter notes directly on the Gage using a familiar
onscreen QWERTY keyboard.
Either the touch screen or navigation buttons can be used to enter annotations.
To Next Page
Loading...
Need help?
General