POSX XP8200 User Manual

Table of Contents
Chapter 1 Introduction…………………………………………………… …2
1.1 Features……………………………………………………………. …2
1.2 Outline……………………………………………………………… …3
Chapter 2 General Specification…………………………………..... …4
2.1 Tube Display……………………………………………………….. …4
2.2 Electricity…………………………………………………………... …5
2.3 Overall Dimensions………………………………………………. …5
2.4 Environment……………………………………………………….. …5
2.5 Driver Interface……………………………………………………. …5
2.6 User Settings……………………………………………………… …6
2.6.1FuctionSetting……………………………………………..………6
Chapter 3 Interface………………………………….... ...............8
3.1 Interface……………………………………………………………. …8
3.2 Interface Conversion Adapter………………………………….. …9
Chapter 4 Command Description……………………………….9
4.1 XP8200 Command Set…………………………………………...11
4.1.1 LD220 Command Mode……………………………………….11
4.1.2 EPSON Command Mode
…………………………………......12
4.1.3 UTC Standard Command Mode
…………………………….15
4.1.4 UTC Enhance Command Mode
…………………………......16
4.1.5 AEDEX Command Mode………………………………….......16
4.1.6 ADM788 Command Mode
…………………………….………17
4.1.7 DSP800 Command Mode
……………………………………..18
4.1.8 CD5220 Command Mode
……………………………………..19
4.1.9 EMAX Command Mode
………………………………………..21
4.1.10 LOGIC Command Mode……………………………………..22
Chapter 5 Character Set…………………………………..........23
5.1 U.S.A. / Standard Character Set ( 20h - 7Eh)………………… .23
5.2 International Character Selection……………………………… .23
5.3 Character Code Table……………………………………………. .24
5.3.1 Page 0 (PC437: U.S.A., Standard Europe)………………24
5.3.2 Page 1 (PC863: Canadian-French)……………………..
...26
5.3.3 Page 2 (Japanese Katakana)
…………………………………27
Chapter 6 Setup XP8200 AP Guide …………………………………28
Chapter 7 Installation Guide…………………………………………... .29
V2.5

POSX XP8200 Specifications

General

Brand	POSX
Model	XP8200
Category	Monitor
Language	English

Summary

Chapter 1 Introduction

1.1 Features

Describes the XP8200 display capabilities like resolution, color, adjustability, interface, and power.

1.2 Outline

Details the physical components of the customer display and lists included accessories.

Chapter 2 General Specification

2.1 Tube Display

Specifies VFD type, pattern, brightness, character set, size, and number of characters.

2.2 Electricity

Covers central control unit specs, speed, connectors, power source, and consumption.

2.3 Overall Dimensions

Lists dimensions for the panel, support, base, viewing angle, rotation, and weight.

2.4 Environment

Defines operating and storage temperature and relative humidity limits.

2.5 Interface

Outlines the available communication interfaces (RS232 or USB).

2.6 User Setting

Details default protocol settings and function configuration via software.

Chapter 3 Interface

3.1 Interface Details

Explains asynchronous serial communication, handshaking, and data flow protocols.

3.2 Connector Information

Describes pin assignments for host computer connection and passthru modes.

Chapter 4 Command Description

4.1.1 LD220 Command Mode

Lists specific commands and their functions for the LD220 protocol.

4.1.2 EPSON Command Mode

Details the commands and functions for the EPSON POS D101 protocol.

4.1.3 UTC Standard Command Mode

Outlines commands for the UTC Standard interface mode.

4.1.8 CD5220 Command Mode

Describes the command set for the CD5220 protocol.

4.1.9 EMAX Command Mode

Lists commands and descriptions for the EMAX command protocol.

4.1.10 LOGIC Command Mode

Details commands and functions specific to the LOGIC protocol.

Chapter 5 Character Set

5.1 U.S.A. / Standard Character Set

Displays the character mapping for the standard U.S.A. set from 20h to 7Eh.

5.2 International Character Selection

Shows international character sets and their corresponding code pages.

5.3 Character Code Tables

Provides detailed character mapping tables for different code pages (PC437, PC863, Japanese).

Chapter 6 Setup Software Utility Guide

Chapter 7 Installation Guide