What to do if Power Acoustik PTID-8940NRBT Gen 2 front panel will not open or close?
If the front panel of your Power Acoustik Car Receiver won't open or close, it might be obstructed. Remove the obstruction and press OPEN to resume the monitor open/close sequence.
Why Power Acoustik PTID-8940NRBT Gen 2 DVD does not start playback?
If your Power Acoustik Car Receiver DVD doesn't start playback, it could be due to several reasons: the disc is warped or scratched (use a disc in good condition), dirty or wet (clean disc with soft cloth), incompatible (use compatible disc), the disc rating exceeds the Parental Lock rating limit (change parental lock settings to lower restriction), disc region code is not compatible with the unit (use disc with proper region code), or the disc is inserted upside down (insert disc with label side up).
Why does flashing image or interference appears on Power Acoustik Car Receiver screen?
A flashing image or interference on your Power Acoustik Car Receiver screen can occur if the DVD is not compatible with the current TV system settings. Change the setup to accommodate the disc.
Why Power Acoustik PTID-8940NRBT Gen 2 Car Receiver image is blurred, distorted, or dark?
If the image on your Power Acoustik Car Receiver is blurred, distorted, or dark, it could be because the disc is illegally copied. Use an original disc.
Why Power Acoustik Car Receiver has prolonged image or improper height/width ratio display?
A prolonged image or improper height/width ratio display on your Power Acoustik Car Receiver may be due to improper video signal connections (check wiring and correct) or an improper aspect ratio setup (use correct aspect ratio setting).
Why Power Acoustik Car Receiver cannot insert disc?
If your Power Acoustik Car Receiver won't let you insert a disc, it's possible that there's already a disc inside the unit. Eject the current disc and then insert the new one.
General| Brand | Power Acoustik |
|---|---|
| Model | PTID-8940NRBT Gen 2 |
| Category | Car Receiver |
| Language | English |
Guides on calibrating the touch screen for accurate input.
Covers configuration options for Bluetooth connectivity and pairing.
Covers common issues like power, fuses, and wiring.
Addresses problems related to radio reception and antenna.
Deals with display issues, front panel operation, and image problems.
Covers issues related to disc insertion, playback, and media errors.
To Next Page