Power Electronics VS65 Series Hardware And Installation Manual

POWER ELECTRONICS
VS65 SERIES MV SOFT STARTER
HANDLING, TRANSPORTATION AND INSTALLATION
23
Figure 5.1 VS65 Forklift truck transportation
When lifting the soft starter using a crane, first gradually lift the wires until they become taugh. The use of
spreaders is recommended. Lift the SS up or down slowly. At the time of placing the SS on the floor, stop
lowering it just before reaching the floor and then slowly lower it on the floor to avoid any shock
Figure 5.2 VS65 crane transportation

Power Electronics VS65 Series Specifications

General

Brand	Power Electronics
Model	VS65 Series
Category	Controller
Language	English