Power-Pole micro anchor - FAQ: Frequently Asked Questions; Boat Compatibility and Spike Usage; Controller and System Compatibility

MICRO Installation & Owner’s Guide 2018 | www.power-pole.com | 15
Q: What is the biggest boat recommended for the MICRO shallow water anchor?
A: The MICRO works best on boats 1,500 pounds or less this includes people and gear.
Q: Why is the Power-Pole spike the best?
A: Power-Pole 3/4” spikes feature a comfort grip handle and have a 1/4-20 threaded
insert on the top for adding flags, lights or cameras. Power-Pole spikes are available
in two strengths: 1) Our Ultra-lite Spike is strong, yet lightweight. It is made of a
composite material and features HollowCore technology for a secure hold of vessels
up to 1500 lbs. 2) Our Heavy-duty Spike is super tough and super strong. It has a
solid core that will securely hold larger vessels. All Power-Pole spikes are tested for
strength and durability.
Q: If vessel is above the weight limit recommendation will this void the
manufacture warranty?
A: No, but this will affect the holding power.
Q: How many wireless controllers can I program to my MICRO anchor?
A: Up to ten (10) wireless controllers can be programmed to operate your single or dual
MICRO anchor.
Q: How do I program a new wireless controller to my existing MICRO
anchor?
A: 1. Press and hold the “PRGM/PAIR” button on top of the MICRO Driver Unit, press
and hold for 3 seconds, until the LED turns solid green.
2. Press and hold either the UP or DOWN button on the wireless controller you are
pairing until the unit responds.
Q: How do I adjust the speed on my included wireless key-fob?
A: The included wireless Key-Fob comes out of the box set to the 100% speed setting.
This can be adjusted by using the C-Monster App.
Q: Can I use a Non Power-Pole Spike with my MICRO anchor?
A: Yes, your Power-Pole Micro will accommodate any 3/4” spike.
Q: What type of 12 volt battery can be used with the MICRO Driver Unit?
A: Any 12 Volt DC battery can be used with the MICRO anchor.
Q: Is the Micro compatible with C-Monster 2.0
A: No, the Micro is only compatible with C-Monster 1.0 controllers (as shown in this guide).
FAQ
Frequently Asked
Questions