Power-Pole micro anchor User Manual

MICRO Installation & Owner’s Guide 2018 | www.power-pole.com | 17
PRECAUTIONS
NOTE: DO NOT use the Power-Pole MICRO as your primary anchorage. Never leave
your boat unattended while anchored solely with the Power-Pole shallow water anchor.
• Prior to use, read this instruction manual carefully. Become familiar with the controls
and how to operate your Power-Pole shallow water MICRO anchor properly.
• Do not allow children to operate or tamper with the Power-Pole MICRO anchor without
adult supervision.
• Do not modify the unit in any way.
• Use only genuine Power-Pole MICRO anchor accessories.
• Always disconnect the 12 Volt power source from the anchor before servicing.
• Do not use your Power-Pole MICRO anchor as a form of assistance when entering or
exiting the vessel.
• During situations with high wind or rough seas, your Power-Pole MICRO anchor may
release holding pressure in order to protect your vessel’s transom.
• If any debris gets caught around your anchor’s spike, disconnect the 12 Volt power
source prior to removal.
MICRO Optional Accessories
Additional Power Cord
Transom Clamp Bracket
Adjustable Mounting Bracket
Micro Battery Pak
with Charger

Power-Pole micro anchor Specifications

General

Deployment Depth	8.5 ft
Power Source	12V battery
Control Options	Wireless remote, foot switch, Smartphone app
Mounting	Transom
Deployment Method	Electric
Power Supply	12V DC